Compatible with standard mil-spec forged AR15/M16 receivers
Thin profile, anti-snag design allows for traditional manipulation of bolt release lever
Easy single screw attachement
Machined from 6061-T6 billet aluminum
Hard anodized black
Torx mounting screw with pre-installed thread locker
Torx wrnech included
Made in U.S.A.

.45 Long Colt 200 Grain Lead Flat Nose, Brass Cased, Boxer Primed, Box of 50 Rounds

Aguila .45 Long Colt Ammo represents some of the best value in Cowboy action ammunition. Brass cases that are fully reloadable and boxer primed loaqded with a Lead Flat Point 200 Grain projectile. Ideal for all .45 LC firearms in good condition. Stock up now and save big!

Technical Information

• 30 round capacity
• Grey teflon coated, aluminum construction with a hard anodized finish
• Anti-tilt follower from MAGPUL Industries
• Corrosion resistant, stainless steel spring
• Removeable steel floorplate
• Lightweight (approx 4oz)
• Uses standard U.S.G.I. replacement parts for easy integration and deployment
• Fits in standard magazine pouches
• Corrosion resistant regardless of outer finish condition

Technical Information

  • CALIBER: 5.56 mm, manufactured at the Lake City Army Ammunition Plant (LCAAP)
  • CASE: Brass (Copper Alloy No. 260)
  • BULLET: 55 gr. FMJ Boat-Tail
  • PRIMER: M41 Operating Range: (-40 degrees to +125 degrees F) 
  • PRIMER SEALANT: Water resistant lacquer 
  • CASE MOUTH SEALANT: Yes 
  • HEADSTAMP: Each loaded cartridge shall be headstamped with the manufacturer's symbol and year of manufacture 
  • ACCURACY: 3-10 round groups not to exceed 2.00" mean radius maximum average at 200 yards 
  • INSTRUMENTAL VELOCITY: 3165 +/- 40 FPS (78 feet from muzzle) using a 5.56 test barrel, 20" long 
  • ENERGY: 1223 Ft-Lbs. at 78’ 
  • WARNING: For use in standard 5.56 mm chambers. Do not use in non-standard 5.56 chambers. 
  • PACKAGING: 20 Rounds per carton. 25 cartons per 500 round case.

Beretta 92FS and M9 magazines 15 Round Factory 9mm mag made in Italy.

Factory Italian Made Berettta 92F / M9 Magazine holds 15 rounds of 9mm ammo. Body is manufactured from high carbon, heat-treated steel for superior strength with a corrosian resistant Black Oxide finish. Self-lubricating follower is injection molded from high-strength polymer for extreme durability. Numbered witness holes on rear of mag allow quick viewing of ammunition.  Features a high tensile strength steel spring that resists memory and won’t weaken over time. Base pad is removeable for easy cleaning and is marked (PB) Pietro Beretta. 

Fits: 92S - 92SB - 92F - 92FS - 92A1 - M9 - M9A1 - 90-Two - Billennium - Vertec - Brigadier - Centurion - Elite. 

PMC Bronze Ammo .223 Remington / 5.56x45mm 55 Grain Full metal jacket 20 rd box

The PMC Bronze  ammunition is brass cased, boxer primed, with fully anealed cases represents a great value in .223 Remington ammo. Excellent for target and range use PMC Bronze offers reliable performance and excellent accuracy. New manufacturer ammunition.

Technical Information

Independence by CCI .9mm Luger, 124 Grain FMJ, Case of 1000 rounds.

Independance 9mm Luger ammunition is 100% non-corrosive, brass cased, boxer primed, new manufactured ammo produced by CCI / ATK / Federal. High quality at a low price make this an ideal range / target ammo. The 124 grain Full metal Jacket projectile is non-magnetic and loaded into a reloadable brass cases with a boxer primer. 

Technical Information

MAGPUL PMAG 30 MAG211 Standard Black AR15/M16 Magazine .223 Remington / 5.56x45mm NATO   

• Impact and crush resistant polymer construction
• Constant-curve internal geometry for smooth feeding
• Anti-tilt, self-lubricating follower for increased reliability
• Multi-use Impact Cover to protect feedlips from impact damage, keep dust and dirt out of the magazine during storage, and can be used as a tool for easy cartridge removal
• USGI-spec stainless steel spring for corrosion resistance and field compatibility
• Textured gripping surface and flared floorplate for positive magazine handling and easy disassembly

American Eagle from Federal Premium Ammunition .223 Remington 55 grain Full Metal Jacket. Brass Case, Boxer Primed, Fully Reloadable, Non-corrosive and non-magnetic. Box of 20 Rounds.

Premium quality  Federal American Eagle .223 ammunition. Feed your AR / M4, Mini14 or other sporter .223 platform this high quality full metal jacket target load. Designed for optimum accuracy and reliability. 

Technical Information
Muzzle Velocity: 3233 fps
Muzzle Energy: 1283 ft. lbs.

Technical Information

  • CALIBER: 5.56 mm, manufactured at the Lake City Army Ammunition Plant (LCAAP)
  • CASE: Brass (Copper Alloy No. 260)
  • BULLET: 55 gr. FMJ Boat-Tail
  • PRIMER: M41 Operating Range: (-40 degrees to +125 degrees F) 
  • PRIMER SEALANT: Water resistant lacquer 
  • CASE MOUTH SEALANT: Yes 
  • HEADSTAMP: Each loaded cartridge shall be headstamped with the manufacturer's symbol and year of manufacture 
  • ACCURACY: 3-10 round groups not to exceed 2.00" mean radius maximum average at 200 yards 
  • INSTRUMENTAL VELOCITY: 3165 +/- 40 FPS (78 feet from muzzle) using a 5.56 test barrel, 20" long 
  • ENERGY: 1223 Ft-Lbs. at 78’ 
  • WARNING: For use in standard 5.56 mm chambers. Do not use in non-standard 5.56 chambers. 
  • PACKAGING: 20 Rounds per carton. 25 cartons per 500 round case.

D&H Industries (Formerly Labelle) 10/30 Round mag body permanently pinned by the manufacturer to 10 rounds for California compliance. Black teflon coated mag body with Magpul Anti-tilt follower and chrome silicon spring for 5.56 NATO / .223 Remington ammo. Holds 10 rounds of ammunition in a 30 round magazine.

FN Herstal 5.7x28mm SS197SR ammo loaded with a 40 Grain Hornady V-Max Flex Tip projectile. This new round has feeds both in Pistols and Rifles chambered in the 5.7x28mm loading. FN developed the 5.7x28mm round for operation the P90 and PS90 Bull-Pup weapons systems as well as the Five-SeveN series of handguns. The low-recoil 5.7x28mm cartridge makes it ideal for personal protection, NRA tactical Police Competition or Target shooting. Brass cased, boxer primed, fully reloadable, non-magnetic, Box of 50 Rounds.

Technical Information

Federal Champion .45 ACP ammo 230 Grain Full Metal Jacket, brass cased, boxer primed, fully reloadable, non-magnetic, Packed 50 rounds per retail box.

Federal Champion Ammunition is premium target ammo prodiced by ATK / Federal for range and target use. The 230 grain FMJ projectile is a lead core with a full metal copper jacket that helps reduce barrel fouling and produces accurate consistant results. Federal Premium ammunition is first quality factory produced ammo. 

Technical Information

FEDERAL Personal Defense .410 handgun Ammo #4 Shot Box of 20.

Developed by Federal for the Taurus Judge revolver, this ammunition, like all Federal Premium Personal Defense Ammunition, is the choice of law enforcement agencies worldwide. This load features a special hull design so they'll produce exceptional results in the Judge. This ammunition is new production.

Federal Champion .45 ACP ammo 230 Grain Full Metal Jacket, brass cased, boxer primed, fully reloadable, non-magnetic, Packed 50 rounds per retail box for a total of 1000 Rds.

Federal Champion Ammunition is premium target ammo prodiced by ATK / Federal for range and target use. The 230 grain FMJ projectile is a lead core with a full metal copper jacket that helps reduce barrel fouling and produces accurate consistant results. Federal Premium ammunition is first quality factory produced ammo. 

Technical Information

SureFire MAG5-60 High Capacity Magazine.

Holds 60 rounds of 5.56 NATO / .223 Remington. Fits M4 / AR-15 / M16 and Variants and other firearms that accept STANAG 4179 magazines. Constructed of Mil-Spec hard-anodized aluminum, the SureFire hi-capacity magazines feed smoothly and reliably due to optimal geometry, non-binding coil springs, and ingenious nesting polymer followers.

Features & Benefits:

• Simple design; does not require lubricants.
• Patent pending design and high-quality coil springs prevent binding, fatigue, and breakage.
• Only 1.66" thick, less than Two standard magazines clipped together.
• Fits in most dual mag pouches (MAG5-60) May remain loaded for extended periods of time without causing springs to fatigue.
• Fit any firearm that accepts AR-15/M16 type mags; meet STANAG 4179 specifications.
• Fully loaded 60 and 100 round magazines are easily seated in the weapons with the bolt forward.

Made in USA

American Eagle from Federal Premium Ammunition .223 Remington 55 grain Full Metal Jacket. Brass Case, Boxer Primed, Fully Reloadable, Non-corrosive and non-magnetic. Packaged in 20 round boxes with 25 boxes per case of 500 rounds.

Premium quality  Federal American Eagle .223 ammunition. Feed your AR / M4, Mini14 or other sporter .223 platform this high quality full metal jacket target load. Designed for optimum accuracy and reliability. 

Technical Information
Muzzle Velocity: 3233 fps
Muzzle Energy: 1283 ft. lbs.

Maglula LULA AK-47 Magazine Loader and Unloader. 

The Maglula LULA mag loader is the first mag loader that actually works as described. Its easy to use, easy to load and un-load, and no sore fingers. Just rock the lever back and forth and drop in rounds till your full. Get the Maglula LULA 

Maglula LULA AR-15 / M16 Magazine Loader and Unloader. 

The Original Maglula LULA mag loader is the first mag loader that actually works as described for M16, AR15 magazines. Easy to use and easy to load and un-load, and no sore fingers. Just rock the lever back and forth and drop in rounds till your full. High quality mag loader / unloader. From Butler Creek.

Winchsester Elite PDX1 Defender 45 ACP Ammo 230 Bonded Jacketed Hollow Point. 20 Rounds Per Box.

Winchesters new Elite Defender PDX1 Ammunition is the FBI's choice for their duty weapons. The Bonded Jacketed Hollow Point load is designed to prevent jacket seperation and provide maximum weight retention in a defense load. The bonded bullet can take on the toughest barriers at varied ranges and velocities. The new PDX1 is easily the best defense round available on the market. Nickel plated brass case and boxer primed. Dont take chances on your defense round, get the Winchester PDX1 today and carry the best.

Technical Information

Zombie Z-Max Ammo from Hornady .9mm Luger 115 Grain Z-Max Flex Tip Expanding Hollow Point. 25 Rounds Per Box.

Hornadys new Zombie Max ammunition is designed to fully expand even when faced with denim clad Zombies. The Flex Tip Z-Max projectile penetrates outer surfaces and reliably expands on impact unlike regular hollow point ammunition that can clog when fired at badly dressed Zombies. The 115 Grain Z-Max bullet is brass cased and boxer primed and packaged 25 rounds per box. Get some Zombie Max ammo today if for no other reason than the fact that while they cant prove Zombies exist....they cant prove they dont.

Technical Information

Hornady Z-Max Ammo from Hornady .45 Auto 185 Grain Z-Max Flex Tip Expanding Hollow Point. 20 Rounds Per Box.

Hornadys new Z-Max Flex Tip Zombie ammo is designed to fully expand even when faced with denim clad Zombies. The Flex Tip Z-Max projectile penetrates Zombies clothing and reliably expands on impact unlike regular hollow point ammunition that can clog when fired at the un-dead. The 185 Grain Z-Max bullet is brass cased and boxer primed and packaged 20 rounds per box. Remember, the only good Zombie is a dead Zombie. 

Technical Information

Hornady Z-Max Zombie .223 Ammo from Hornady 55 Grain Z-Max Flex Tip Expanding Hollow Point. 20 Rounds Per Box.

Hornadys new Zombie Max ammunition is designed for controlled expansion even when faced with denim clad Zombies. The Flex Tip Z-Max projectile penetrates outer surfaces and reliably expands on impact unlike regular hollow point ammunition that can clog when fired at badly dressed Zombies. The 55 Grain Z-Max bullet is brass cased and boxer primed and packaged 20 rounds per box. Get some Zombie Max ammo today and be prepared for any Zombie invasion. 

Technical Information

Check-Mate Beretta 92FS and M9 magazines.

Magazines are Mil-Spec, date coded and Govt marked magazines in a durable Dry Film Lube for ultimate corrosion resistance and reliablity. 15 round capacity. Used in excellent condition.

MAG411-BLK

MAGPUL AFG Angled Fore Grip Black MAG411 Fits Piccatinny Rail

Compatible with most any 1913 Picatinny-railed hand guard, the Magpul AFG (Angled Fore-Grip) takes into account natural body mechanics and provides a comfortable and stable user interface that reduces fatigue and allows for more precise weapon control. By positioning the shooter's hand high on the centerline of the bore, unlike conventional vertical fore-grips, the AFG helps mitigate recoil and control the weapon to facilitate faster, more accurate follow-up shots.

Features

• Polymer three-piece design with an interchangeable finger shelf that allows for a flat "A1-style" surface or an "A2-style" finger nub
• Mounts to MIL-STD-1913 Picatinny and NATO STANAG 4694 rails (min. of ~4" recommended)
• All mounting hardware included

Specifications

• AFG - Angled Fore Grip
  
  • Weight: 2.92 oz.
  • Length: 5.55 in.
  • Height, over rail: 1.75 in.
  • Width, maximum: 1.77 in.

AK-47 Steel 30 Round Surplus Magazine for 7.62x39mm Russian. Package of 5

Factory built steel AK-47 mags direct from former Com-bloc Eastern European manufacturer. These are the tough 30 round double stack steel mags your AK-47 Carbine was designed for. Stock up now before they are gone again as supplies are limited. Rugged, dependable, and designed to function under any circumstances. Factory Surplus in un-issued condition. Get the 5 pack and SAVE!

AK-47 Steel 30 Round Surplus Magazine for 7.62x39mm Russian.

Factory built steel AK-47 mags direct from former Com-bloc Eastern European manufacturer. These are the tough 30 round double-stack steel mags your AK47 rifle was designed for. Stock up now before they are gone again as supplies are limited. Factory Surplus in un-issued condition.

C.O.P. S&W .500 magnum Ammo 275 Grain Solid Copper Hollow Point. Box of 20

Copper Only Projectiles (C.O.P.) ammunition is loaded with Solid Copper Hollow Point projectiles. Brass cased, Boxer primed. The large hollow point results in extreme expansion and maximum weight retention. The 100% lead free solid copper projectile eliminates the possibility of jacket separation due to the extreme pressures. C.O.P. .500 S&W ammo is ideal for self defense and hunting. Made in the USA. 

Technical Information

Ballistics Information: 

WIDE-OUT Tactical Shotgun Safety for Mossberg 500, 590, 835, 930, 935

The Wide-Out Tactical Shotgun Safety is manufactured in the USA of billet 7075 aircraft aluminum not plastic. Twice as strong as your stock safety and three times as large. The Wide-Out Safety is perfect for wet weather or snow when slippery hands or gloves make operation of the stock mossberg safety difficult. The Wide-Out Safety was designed to directly replace the factory safety in minutes. Can be installed up or down and includes all hardware and even the allen wrench for installation. The Stock plastic Mossberg safety is prone to wear and breakage. Install the Wide-Out tactical Safety and stop fumbling with the small, plastic stock unit your shotty shipped with. 

No gunsmithing required, made in USA.

GRABBER Tactical Charging Handle For Mossberg 930 SPX and 935.

The GRABBER Tactical Charging Handle is the ideal replacement for that small, pointy, factory handle provided with your weapon. These units are milled from solid steel 4340 barstock, hardened, and finsihed in Black Oxide to match your shotgun. Knurled handle is ideal for use with gloves and the smooth finger groove is designed not to dig into a non gloved hand. These units make last round ejection a breeze and the large round design provides a larger surface area thats easy to grab with or without gloves. No gunsmithing required, direct replacement for factory handle.

GERMGSG522 Magazine, 22LR, Black Polymer Factory Mag, 22 Round Capacity

Genuine factory magazines for the popular GSG-5 series of pistols and carbines. Manufactured by German Sport Guns (GSG) in Germany. Polymer construction.

FEDERAL XM80C 7.62x51mm NATO. / .308 Winchester. 149 Grain, FMJ. 20 Round Box.

Federal XM80C Ammo is manufactured at the Lake City Army Ammunition Plant operated by ATK. XM80C mil-spec product is brand new, brass-cased, boxer-primed, non-corrosive, and reloadable. This is top of the line, American-made target and range ammo suitable for all purposes.

Note: This product contains steel in the projectile as it is made to military specifications. Additionally, this brass is manufactured on mil-spec production lines which require evidence of the annealing process be left on the brass near the neck of the casing. This is the darker residue that is visually noticeable around the case neck. Both commercial and mil-spec brass undergoes this same annealing process which make the brass stronger and less brittle. The annealing process essentially runs the brass through a series of flames which heat the brass having the affect of re-strengthening it in its final shape. Commercial brass is then re-cleaned after it has been annealed to make it cosmetically more appealing for the commercial market. Military requirements on the other hand place a larger emphasis on the structural integrity of the casing so they require that evidence that the brass has been annealed remain on the brass.

Made in USA.

Fiocchi 9MM 115 Grain Jacketed Hollow Point Box of 50 Rounds

Fiocchi of America 9mm Jacketed Hollow Point  Ammo is produced using clean burning powders and precise tolerances providing superb accuracy and precision. Ideal for those looking for a defense round in the 9mm loading. Brass cased and Boxer primed this fully non-corrosive and reloadable 9mm defense load is ideal in semi-automatics.

SPECIFICATIONS:
Mfg Item Num: 9APHP 
Caliber : 9MM LUGER / PARABELLUM
Bullet Type : Jacketed Hollow Point
Bullet Weight : 115 GR
Muzzle Energy : 400 ft lbs
Muzzle Velocity : 1250 fps

Federal XM193BK NATO 5.56x45mm 55 grain FMJBT. 250 round battle Pack. This ammo was loaded by Federal for the U.S. Government to NATO specifications.Comes in reloadable brass cases. Please note: This is military ammunition that may be loaded to higher pressures than SAAMI specifications for 223 Remington.

Technical Information
Muzzle Velocity: 3240 fps
Muzzle Energy: 1282 ft. lbs.

Note: While, .223 and 5.56 x 45 ammo are interchangeable, the 5.56 may be loaded at higher pressures than .223. SAAMI warns not to use 5.56 ammo in sporter 223 rifles.

  • CALIBER: 5.56 mm, manufactured at the Lake City Army Ammunition Plant (LCAAP)
  • CASE: Brass (Copper Alloy No. 260)
  • BULLET: 55 gr. FMJ Boat-Tail
  • PRIMER: M41 Operating Range: (-40 degrees to +125 degrees F) 
  • PRIMER SEALANT: Water resistant lacquer 
  • CASE MOUTH SEALANT: Yes 
  • ACCURACY: 3-10 round groups not to exceed 2.00" mean radius maximum average at 200 yards 
  • INSTRUMENTAL VELOCITY: 3165 +/- 40 FPS (78 feet from muzzle) using a 5.56 test barrel, 20" long 
  • ENERGY: 1223 Ft-Lbs. at 78’ 
  • CHAMBER PRESSURE: Piezotronic maximum average per 10 rounds - 55000 PSI in 5.56 test barrel (case mouth location) 
  • VISUAL INSPECTION: 100% visual inspection of finished cartridges prior to packaging 
  • WARNING: For use in standard 5.56 mm chambers. Do not use in non-standard 5.56 chambers. 
  • PACKAGING: 250 Round Battle Pack

Magpul Enhanced Rubber Butt-Pad 0.

Magpul Enhanced Rubber Butt-Pad, 0.70" is an optional replacement butt pad for the CTR® and MOE® Mil-Spec stocks as well as all STR™, ACS-L™, ACS™ and UBR®stocks. It is designed for enhanced shoulder purchase as well as offering improved recoil reduction with its thicker, vented construction. The Enhanced Rubber Butt-Pad can also be installed on Commercial-Spec MOE/CTR stocks, but may prohibit use of fully collapsed position due the extended, slanted back of most commercial-spec receiver extensions.
All mounting hardware included.

Made in U.S.A.

BattleComp BABC fits 7.62mm/6.8mm tactical rifles and carbines. Black Oxide Finish

Fits LMT .308/7.62mm, LaRue OBR/OSR, DPMS, Compatible with the new .300 AAC Blackout

The BattleComp BABC is designed to reduce recoil and eliminate muzzle climb and reduce the flash signature.  It has numerous ports in all directions except downward as well as 4 small front ports to disperse the blast.  The Battle Comp BABC controls the blast to the shooter better than any other muzzle brake design.  Created for CQB type applications with 7.62mm or 6.8 SPC tactical rifles and carbines.  This compensator is threaded 5/8x24 Right Hand which is standard for tactical 7.62mm barrels and many 6.8 barrels.  Precision machined from 17-4 PH heat treated stainless steel with a matte black oxide finish. Crush washer included.

Made in USA

U.S. Patent Pending #63/343,941

Glock 19 / 26 15 Round Magazine 9mm Luger.

KCI full-metal lined magazines for the Glock 19 and 26. 15-round 9mm New Unmarked magazines in the wrap

Manufactured in Korea

Glock 22 15 Round Magazine 9mm Luger.

KCI Brand full-metal lined magazines for the Glock .40 15-round .40 Cal New Unmarked magazines in the wrap

Manufactured in Korea

.30 Carbine, M-1 Rifle, Blued Steel Magazine, New in wrap, 15 Round Capacity. Excellent Quality Steel Replacement Mag for your WWII M1 Carbine Rifle.

Manufactured in Korea by KCI

MAGPUL ACS MAG370-BLK Adaptable Carbine Storage Stock Milspec. Black.

The patent-pending Magpul ACS (Adaptable Carbine/Storage) – Mil-Spec Model is a drop-in replacement butt-stock for AR15/M16 carbines using mil-spec sized receiver extension tubes. A streamlined, anti-snag profile shields the release latch to prevent accidental activation and the extra-power lock mechanism uses a premium chrome-silicon spring to avert auto-collapse failure by resisting spring relaxation. Similar to the Magpul CTR™, the ACS also features a supplemental friction lock system that minimizes wobble* for enhanced weapon stability and accuracy.

Features dual, rear accessible, water-resistant battery storage tubes and an integral storage compartment in the butt of the stock provides multiple storage options. The ACS comes standard with a 0.30" thick rubber butt-pad which provides positive shoulder purchase to prevent slippage even with body armor or modular gear. 

Mounts on Mil-Spec AR15/M16 carbine receiver extention (buffer tube) (including; Colt, BCM, CMT, LMT, Vltor, Stag)
Made in U.S.A.

Magpul PRS Stock Precision Rifle Stock MAG307-BLK For AR15 .223.

The latest generation of the Magpul Ind. Precision Rifle Stock is designed to be a field precision stock. Magpul Ind. PRS stock is adjustable for both height and length of pull. At it's shortest LOP the Precision Rifle Stock is about the length of an A1 type Stock and extends about half and inch longer than an AR15  A2 stock.
AR-15  PRS  RESOURCES:Billet machined buttplate, stainless steel shafts and Aluminum ball detent knobs

Body features removable end cap and integrated Picatinny rail mountDrop in replacement for AR15/M16 full sized stocks.Uses stock A1/A2 rifle receiver extension (buffer tube) without the A2 spacerComes with all mounting hardware and two ambi sling loops. 

Magpul PRS Stock Precision Rifle Stock MAG307-DKEAR Dark earth For AR15 .223.

The latest generation of the Magpul Ind. Precision Rifle Stock is designed to be a field precision stock. Magpul Ind. PRS stock is adjustable for both height and length of pull. At it's shortest LOP the Precision Rifle Stock is about the length of an A1 type Stock and extends about half and inch longer than an AR15  A2 stock.
AR-15  PRS  RESOURCES:Billet machined buttplate, stainless steel shafts and Aluminum ball detent knobs

Body features removable end cap and integrated Picatinny rail mountDrop in replacement for AR15/M16 full sized stocks.Uses stock A1/A2 rifle receiver extension (buffer tube) without the A2 spacerComes with all mounting hardware and two ambi sling loops. 

MAGPUL ACS MAG371-BLK Adaptable Carbine Storage Stock Black. For Commercial Buffer Tubes

The patented Magpul ACS (Adaptable Carbine/Storage) – Commercial-Spec Model is a drop-in replacement butt-stock for AR15/M16 carbines using commercial-spec sized receiver extension tubes. A streamlined, anti-snag profile shields the release latch to prevent accidental activation and the extra-power lock mechanism uses a premium chrome-silicon spring to avert auto-collapse failure by resisting spring relaxation. Similar to the Magpul CTR™, the ACS also features a supplemental friction lock system that minimizes wobble* for enhanced weapon stability and accuracy.

Features dual, rear accessible, water-resistant battery storage tubes and an integral storage compartment in the butt of the stock provides multiple storage options. The ACS comes standard with a 0.30" thick rubber butt-pad which provides positive shoulder purchase to prevent slippage even with body armor or modular gear. 

Mounts on Commercial AR15/M16 carbine receiver extention (buffer tube) 
Made in U.S.A.

NOTE: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec and commercial-spec. If you have a mil-spec extension on your rifle, make sure to order the Mil-Spec ACS. Please see the "Related Info" section above to determine which tube you have.

Aguila, .30 Carbine 110 Grain FMJ, Packed 50 rounds per box / 20 boxes per case / 1000 Rounds Total

Feed that .30 Caliber M1 carbine with this brand new manufactured high quality ammo from Aguila North America. This 100% non-corrosive, brass cased, boxer primed. Aguila supplies some of the finest .22 Caliber ammunition found anywhere and also supplies many central and south American militaries and police forces with quality ammunition. The 110 grain Full metal Jacket projectile is loaded into a reloadable brass cases with a boxer primer. Packaged in 50 round retail boxes and 20 boxes per 1000 round case.

Technical Information
Muzzle Velocity: 1990 fps

Aguila, .30 Carbine 110 Grain FMJ, 50 Round Box

Feed that .30 Caliber M1 carbine with this brand new manufactured high quality ammo from Aguila North America. This 100% non-corrosive, brass cased, boxer primed. Aguila supplies some of the finest .22 Caliber ammunition found anywhere and also supplies many central and south American militaries and police forces with quality ammunition. The 110 grain Full metal Jacket projectile is loaded into a reloadable brass cases with a boxer primer.

Technical Information
Muzzle Velocity: 1990 fps

Technical Information
 Muzzle Velocity: 31650 fps

Note: While, .223 and 5.56 x 45 ammo are interchangeable, the 5.56 may be loaded at higher pressures than .223. SAAMI warns not to use 5.56 ammo in sporter 223 rifles. 

Features

  • CALIBER: 5.56 mm, manufactured at the Lake City Army Ammunition Plant (LCAAP)
  • CASE: Brass (Copper Alloy No. 260)
  • BULLET: 55 gr. FMJ Boat-Tail
  • PRIMER: M41 Operating Range: (-40 degrees to +125 degrees F) 
  • PRIMER SEALANT: Water resistant lacquer 
  • CASE MOUTH SEALANT: Yes 
  • CASE KNURL: No 
  • HEADSTAMP: Each loaded cartridge shall be headstamped with the manufacturer's symbol and year of manufacture 
  • ACCURACY: 3-10round groups not to exceed 2.00" mean radius maximum average at 200 yards 
  • INSTRUMENTAL VELOCITY: 3165 +/- 40 FPS (78 feet from muzzle) using a 5.56 test barrel, 20" long 
  • ENERGY: 1223 Ft-Lbs. at 78’ 
  • CHAMBER PRESSURE: Piezotronic maximum average per 10 rounds - 55000 PSI in 5.56 test barrel (case mouth location) 
  • BULLET PULL: Minimum individual 35 lbs. 
  • PROPELLANT DETECTION: 100% mechanical and/or electrical detection of propellant levels within the cartridge 
  • VISUAL INSPECTION: 100% visual inspection of finished cartridges prior to packaging 
  • WARNING: For use in standard 5.56 mm chambers. Do not use in non-standard 5.56 chambers. 
  • PACKAGING: 20 Rounds per carton. 25 cartons per 500 round case.

Aguila .357 Magnum Ammo 158 Grain Semi-Jacketed Hollow Point. Box of 50 Rounds.

Aguila 357 Magnum ammunition is 100% non-corrosive, brass cased, boxer primed, new manufactured ammo produced by the Aguila Ammunition Company of North America. Aguila supplies some of the finest .22 Caliber ammunition found anywhere  and supplies many central and south American militaries and police forces with quality ammunition including this 357 magnum ammo. The 158 grain Full metal Jacket projectile is non-magnetic and loaded into a reloadable brass cases with a boxer primer. 

Technical Information

Aguila .38 Special 158 Grain Semi-Jacketed Hollow Point. Box of 50 Rounds.

Aguila .38 Special ammunition is 100% non-corrosive, brass cased, boxer primed, new manufactured ammo produced by the Aguila Ammunition Company of North America. Aguila supplies some of the finest .22 Caliber ammunition found anywhere  and supplies many central and south American militaries and police forces with quality ammunition. The 158 grain Semi-Jacketed Hollow Point projectile is non-magnetic and loaded into a reloadable brass cases with a boxer primer. 

Technical Information

Aguila .380 ACP Ammo 95 Grain Full metal Jacket. Box of 50 Rounds.

Aguila .380 ACP Ball ammunition is 100% non-corrosive, brass cased, boxer primed, new manufactured ammo produced by the Aguila Ammunition Company of North America. Aguila supplies some of the finest .22 Caliber ammunition found anywhere  and supplies many central and south American militaries and police forces with quality ammunition. The 95 grain Full metal Jacket projectile is non-magnetic and loaded into a reloadable brass cases with a boxer primer. 

Technical Information

Aguila .380 ACP Ammo 95 Grain Full metal Jacket. Case of 1000 Rounds.

Aguila .380 ACP Ball ammunition is 100% non-corrosive, brass cased, boxer primed, new manufactured ammo produced by the Aguila Ammunition Company of North America. Aguila supplies some of the finest .22 Caliber ammunition found anywhere  and supplies many central and south American militaries and police forces with quality ammunition. The 95 grain Full metal Jacket projectile is non-magnetic and loaded into a reloadable brass cases with a boxer primer. 

Technical Information

Aguila .38 Special 158 Grain Semi-Jacketed Hollow Point. Case of 1000 Rounds.

Aguila .38 Special ammunition is 100% non-corrosive, brass cased, boxer primed, new manufactured ammo produced by the Aguila Ammunition Company of North America. Aguila supplies some of the finest .22 Caliber ammunition found anywhere  and supplies many central and south American militaries and police forces with quality ammunition. The 158 grain Semi-Jacketed Hollow Point projectile is non-magnetic and loaded into a reloadable brass cases with a boxer primer. 

Technical Information

Aguila .38 Special 130 Grain Full Metal Jacket Case of 1000 Rounds.

Aguila .38 Special ammunition is 100% non-corrosive, brass cased, boxer primed, new manufactured ammo produced by the Aguila Ammunition Company of North America. Aguila supplies some of the finest .22 Caliber ammunition found anywhere  and supplies many central and south American militaries and police forces with quality ammunition. The 130 grain Full Metal Jacket projectile is non-magnetic and loaded into a reloadable brass cases with a boxer primer. 

Technical Information

Aguila .38 Special 130 Grain Full Metal Jacket box of 50 rounds.

Aguila .38 Special ammunition is 100% non-corrosive, brass cased, boxer primed, new manufactured ammo produced by the Aguila Ammunition Company of North America. Aguila supplies some of the finest .22 Caliber ammunition found anywhere  and supplies many central and south American militaries and police forces with quality ammunition. The 130 grain Full Metal Jacket projectile is non-magnetic and loaded into a reloadable brass cases with a boxer primer. 

Technical Information

Aguila .9mm Luger, 124 Grain FMJ, Packed 50 rounds per retail box and 20 boxes per case of 1000 rounds.

Aguila 9mm Luger ammunition is 100% non-corrosive, brass cased, boxer primed, new manufactured ammo produced by the Aguila Ammunition Company of North America. Aguila supplies some of the finest .22 Caliber ammunition found anywhere  and supplies many central and south American militaries and police forces with quality ammunition including this .9mm Luger ammo. The 124 grain Full metal Jacket projectile is non-magnetic and loaded into a reloadable brass cases with a boxer primer. Stock up now on this high quality NATO 9mm ammunition.

Technical Information

Aguila .9mm Luger, 124 Grain FMJ, Brass Case and Boxer Primed, Packed 50 rounds per retail box.

Aguila 9mm Luger ammunition is 100% non-corrosive, brass cased, boxer primed, new manufactured ammo produced by the Aguila Ammunition Company of North America. Aguila supplies some of the finest .22 Caliber ammunition found anywhere  and supplies many central and south American militaries and police forces with quality ammunition including this .9mm Luger ammo. The 124 grain Full metal Jacket projectile is non-magnetic and loaded into a reloadable brass cases with a boxer primer. Stock up now on this high quality NATO 9mm ammunition. While Supplies Last.

Technical Information

Aguila .45 ACP ( Automatic Colt Pistol) 230 Grain FMJ, Packed 50 rounds per retail box and 20 boxes per case of 1000 rounds.

Aguila 45 ACP ammunition is 100% non-corrosive, brass cased, boxer primed, new manufactured ammo produced by the Aguila Ammunition Company of North America. Aguila supplies some of the finest .22 Caliber ammunition found anywhere  and supplies many central and south American militaries and police forces with quality ammunition including this 45 ACP ammo. The 230 grain Full metal Jacket projectile is non-magnetic and loaded into a reloadable brass cases with a boxer primer. 

Technical Information

Aguila .45 ACP (Automatic Colt Pistol) 230 Grain FMJ, Packed 50 rounds per retail box and 20 boxes per case of 1000 rounds.

Aguila 45 ACP ammunition is 100% non-corrosive, brass cased, boxer primed, new manufactured ammo produced by the Aguila Ammunition Company of North America. Aguila supplies some of the finest .22 Caliber ammunition found anywhere  and supplies many central and south American militaries and police forces with quality ammunition including this 45 ACP ammo. The 230 grain Full metal Jacket projectile is non-magnetic and loaded into a reloadable brass cases with a boxer primer. 

Technical Information

Aguila .357 Magnum Ammo 158 Grain Semi- Jacketed Hollow Point. Case of 1000 Rounds retail packaged.

Aguila 357 Magnum ammunition is 100% non-corrosive, brass cased, boxer primed, new manufactured ammo produced by the Aguila Ammunition Company of North America. Aguila supplies some of the finest .22 Caliber ammunition found anywhere  and supplies many central and south American militaries and police forces with quality ammunition including this 357 magnum ammo. The 158 grain Full metal Jacket projectile is non-magnetic and loaded into a reloadable brass cases with a boxer primer. 

Technical Information

Aguila .40 Cal S&W ( Smith & Wesson) 180 Grain FMJ, Box of 50 Rounds.

Aguila 40 Cal S&W ammunition is 100% non-corrosive, brass cased, boxer primed, new manufactured ammo produced by the Aguila Ammunition Company of North America. Aguila supplies some of the finest .22 Caliber ammunition found anywhere  and supplies many central and south American militaries and police forces with quality ammunition including this 40 S&W ammo. The 180 grain Full metal Jacket projectile is non-magnetic and loaded into a reloadable brass cases with a boxer primer. 

Technical Information

Aguila .40 Cal S&W ( Smith & Wesson) 180 Grain FMJ, Case of 1000 Rounds.

Aguila 40 Cal S&W ammunition is 100% non-corrosive, brass cased, boxer primed, new manufactured ammo produced by the Aguila Ammunition Company of North America. Aguila supplies some of the finest .22 Caliber ammunition found anywhere  and supplies many central and south American militaries and police forces with quality ammunition including this 40 S&W ammo. The 180 grain Full metal Jacket projectile is non-magnetic and loaded into a reloadable brass cases with a boxer primer. 

Technical Information

MAGTECH 9mm Luger Ammunition 115 Grain FMJ 50 round box. New production, non-corrosive, fully reloadable brass case. Magtech is high quality ammunition and the 115 Grain projectile provides less muzzle flip than a 124 Grain projectile. Retail packaged in 50 round boxes. All new production. 

Magtech has manufactured its own components since 1926 excercising full quality control over every stage of the manufacturing process as well as the final product. Each finished cartridge is carefully assembled using only the highest quality components for assured reliability. Perfect for target shooting Magtech 9mm ammo was designed for shooters looking for reliability, accuracy, and performance. This ammunition is new production, non-corrosive, in boxer primed, reloadable brass cases. 

Technical Information

Sellier & Bellot 9mm Luger Ammo. 115 Grain FMJ, Box of 50 Rounds.

Since 1825 Sellier & Bellot has manufactured quality ammunition for Europes militaries. Sellier & Bellots 115 grain 9mm ammunition is designed for target shooters and sportsman alike. Quality components and precision manufacturing processes make Sellier & Bellot the choice for competition shooters, hunters, law enforcement agencies and militaries around the world. This ammunition is new production, non-corrosive, and boxer primed, in reloadable brass cases. 

Technical Information

Sellier & Bellot 9mm Luger Ammo. 115 Grain FMJ, Case of 1000 rounds.

Since 1825 Sellier & Bellot has manufactured quality ammunition for Europes militaries. Sellier & Bellots 115 grain 9mm ammunition is designed for target shooters and sportsman alike. Quality components and precision manufacturing processes make Sellier & Bellot the choice for competition shooters, hunters, law enforcement agencies and militaries around the world. This ammunition is new production, non-corrosive, and boxer primed, in reloadable brass cases. 

Technical Information

MAGTECH 9mm Luger Ammunition 115 Grain FMJ 1000 Round Case. New production, non-corrosive, fully reloadable brass case. Magtech is high quality ammunition and the 115 Grain projectile provides less muzzle flip than a 124 Grain projectile. Retail packaged in 50 round boxes / 20 boxes per case / 1000 rounds total. All new production. 

Magtech has manufactured its own components since 1926 excercising full quality control over every stage of the manufacturing process as well as the final product. Each finished cartridge is carefully assembled using only the highest quality components for assured reliability. Perfect for target shooting Magtech 9mm ammo was designed for shooters looking for reliability, accuracy, and performance. This ammunition is new production, non-corrosive, in boxer primed, reloadable brass cases. 

Technical Information

HORNADY .380 ACP Critical Defense Ammo 90 grain FTX Hollow Point Box of 25 round box.

Reliable and controlled expansion, regardless of the target, every time. Hornady Critical Defense ammunition is loaded with Hornady's patented Flex Tip bullet. Unlike most hollow point bullets, the Flex Tip bullet features a soft polymer insert that allows for consistent and reliable expansion. Each bullet is custom designed for individual loads and loaded in nickel plated cases to help prevent corrosion. 

• Unaffected by thick and heavy clothing, including denim and leather.
• Patented FTX bullet delivers superior controlled expansion and large, deep wound cavities over a wide range of velocities.
• Clean burning and stable propellants reduce recoil in lightweight handguns, and perform consistently in all temperatures.
• Minimal muzzle flash protects night vision.
• Feeds reliably in all pistols.
• Shiny silver nickel plating prevents corrosion, and is easily visible in low light situations.
• Bullets are cannelured and crimped to avoid bullet setback.
• Bullets are custom designed for individual loads.
• The most effective, consistent, and reliable self-defense ammunition available today!

Ballistics Information:

Aguila, .223 Remington, 55 Grain FMJ, Packed 50 rounds per box and 20 boxes per case for a total of 1000 rounds.

This 100% non-corrosive, brass cased, boxer primed, newly manufactured ammunition was produced by the Aguila Ammunition Company of North America. Aguila supplies some of the finest .22 Caliber ammunition found anywhere and also supplies many central and south American militaries and police forces with quality ammunition including this .223 ammo. The 55 grain Full metal Jacket projectile is loaded into a reloadable brass cases with a boxer primer. Packaged in 50 round retail boxes and 20 boxes per 1000 round case.

Technical Information
Muzzle Velocity: 2900
Muzzle Energy: 1200 ft. lbs.

Aguila, .223 Remington, 55 Grain FMJ, Packed 50 rounds per box.

This 100% non-corrosive, brass cased, boxer primed, newly manufactured ammunition was produced by the Aguila Ammunition Company of North America. Aguila supplies some of the finest .22 Caliber ammunition found anywhere and also supplies many central and south American militaries and police forces with quality ammunition including this .223 ammo. The 55 grain Full metal Jacket projectile is loaded into a reloadable brass cases with a boxer primer. Packaged in 50 round retail boxes.

Technical Information
Muzzle Velocity: 2900
Muzzle Energy: 1200 ft. lbs.

Federal, XM193F NATO, 5.56x45mm, 55 grain, FMJBT. Packed 20 rounds per box and 50 boxes per case for a total of 1000 rounds.

This ammo was loaded by Federal for the U.S. Government to NATO specifications.Comes in reloadable brass cases. Please note: This is military ammunition that may be loaded to higher pressures than SAAMI specifications for 223 Remington.

Technical Information
Muzzle Velocity: 3240 fps
Muzzle Energy: 1282 ft. lbs.

Note: While, .223 and 5.56 x 45 ammo are interchangeable, the 5.56 may be loaded at higher pressures than .223. SAAMI warns not to use 5.56 ammo in sporter 223 rifles.

  • CALIBER: 5.56 mm, manufactured at the Lake City Army Ammunition Plant (LCAAP)
  • CASE: Brass (Copper Alloy No. 260)
  • BULLET: 55 gr. FMJ Boat-Tail
  • PRIMER: M41 Operating Range: (-40 degrees to +125 degrees F) 
  • PRIMER SEALANT: Water resistant lacquer 
  • CASE MOUTH SEALANT: Yes 
  • ACCURACY: 3-10 round groups not to exceed 2.00" mean radius maximum average at 200 yards 
  • INSTRUMENTAL VELOCITY: 3165 +/- 40 FPS (78 feet from muzzle) using a 5.56 test barrel, 20" long 
  • ENERGY: 1223 Ft-Lbs. at 78’ 
  • CHAMBER PRESSURE: Piezotronic maximum average per 10 rounds - 55000 PSI in 5.56 test barrel (case mouth location) 
  • VISUAL INSPECTION: 100% visual inspection of finished cartridges prior to packaging 
  • WARNING: For use in standard 5.56 mm chambers. Do not use in non-standard 5.56 chambers. 
  • PACKAGING: 1000 Rounds per case bulk packed

TULA 7.62x39 full metal jacket ammunition is suitable for hunting, target practice, range training, or plinking. It is cost effective and reliable and is produced by one of the most established ammunition plants in the world. Tula ammunition derives its name from its birthplace, the Tula Cartridge Works in Tula, Russia. 

The Tula Cartridge Works plant was founded in 1880 and is currently one of the largest ammunition manufacturing plants in the world. The Tula name has gained a following worldwide for its rugged, reliable, and economical product. This cartridge complies with CIP requirements and the casing features a polymer-coated steel casing with a non-corrosive Berdan Primer. The bi-metal projectile features a solid lead core with a mild steel jacket that has been copper plated. 

TULA 7.62x39 ammo is rugged like the country where it was manufactured and keeps its qualities during extreme temperatures ranging from -58 degrees Fahrenheit to 122 degrees Fahrenheit ensuring that it will perform when needed most.

Made in Russia

Muzzle Velocity: 2396 fps
Max Pressure: 39,800 psi

TULA 7.62x39 full metal jacket ammunition is suitable for hunting, target practice, range training, or plinking. It is cost effective and reliable and is produced by one of the most established ammunition plants in the world. Tula ammunition derives its name from its birthplace, the Tula Cartridge Works in Tula, Russia. 

The Tula Cartridge Works plant was founded in 1880 and is currently one of the largest ammunition manufacturing plants in the world. The Tula name has gained a following worldwide for its rugged, reliable, and economical product. This cartridge complies with CIP requirements and the casing features a polymer-coated steel casing with a non-corrosive Berdan Primer. The bi-metal projectile features a solid lead core with a mild steel jacket that has been copper plated. 

TULA 7.62x39 ammo is rugged like the country where it was manufactured and keeps its qualities during extreme temperatures ranging from -58 degrees Fahrenheit to 122 degrees Fahrenheit ensuring that it will perform when needed most.

500 Round Case.

Made in Russia

Muzzle Velocity: 2396 fps
Max Pressure: 39,800 psi

TULA 7.62x39 full metal jacket ammunition is suitable for hunting, target practice, range training, or plinking. It is cost effective and reliable and is produced by one of the most established ammunition plants in the world. Tula ammunition derives its name from its birthplace, the Tula Cartridge Works in Tula, Russia. 

The Tula Cartridge Works plant was founded in 1880 and is currently one of the largest ammunition manufacturing plants in the world. The Tula name has gained a following worldwide for its rugged, reliable, and economical product. This cartridge complies with CIP requirements and the casing features a polymer-coated steel casing with a non-corrosive Berdan Primer. The bi-metal projectile features a solid lead core with a mild steel jacket that has been copper plated. 

TULA 7.62x39 ammo is rugged like the country where it was manufactured and keeps its qualities during extreme temperatures ranging from -58 degrees Fahrenheit to 122 degrees Fahrenheit ensuring that it will perform when needed most.

20 Round Box

Made in Russia

Muzzle Velocity: 2396 fps
Max Pressure: 39,800 psi

M16 / AR15 Style Flash Hider for the AK-47 series rifle with 14-1 Left Hand Thread Barrel. MADE IN USA and counts towards US Parts Count.

A1 Bird Cage Flash Hider adapted to the AK47 weapons platform. Features 14x1 Left Hand Threads and is a direct replacement to your factory AK-47 muzzle nut or slant comp. Made in USA from high strength steel and finished in Black Oxide Black to match most AKs and includes pin detent like original. Counts as 922R compliance part.

RWS 9mm Luger Ammunition 124 Grain FMJ 50 round box. New production, non-corrosive, fully reloadable brass case. RWS manufacturers some of the highest quality ammunition available. The RWS 9mm round is produced for and used by the majority of NATO pact countries in Eastern Europe. RWS is used by SIG SAUER for firearms function testing. Retail packaged. All new production. German engineered, manufacturered in Switzerland.

• Caliber: 9mm Luger
• Bullet Weight: 124 Grain
• Bullet Style: Full Metal Jacket / Bi-Metal (lead core with a mild steel, copper plated jacket)
• Case Type: Brass 
• Muzzle Velocity: 1160 fps
• Muzzle Energy: 348 ft. lbs.

• Feeds cartridges at a 30º angle, as originally designed for the 10/22 rifle
• Constant-force stainless steel spring
• Self-lubricating anti-tilt follower

Hornady .45 ACP, 200 Grain XTP (Extreme Terminal Performance) Premium Defense Round. 20 Rounds per Box. 

The Hornady XTP features controlled expansion and a heavier jacket that withstands the high pressures and velocities found in high performance handgun cartridges. All Hornady custom pistol ammunition is supremely accurate and delivers maximum knockdown power. Hornady brass ensures reliable feeding, corrosion resistance, proper hardness, and the ability to withstand maximum chamber pressures. Each cartridge is loaded to ensure optimal pressure, velocity, and consistency. The powder and the primer is carefully matched to each individual load, and specifically selected for their ability to quickly, completely, and reliably detonate. Fully reloadable.

• Caliber: .45 ACP
• Bullet Weight: 200 Grain
• Bullet Style: Jacket Hollow Point XTP
• Case Type: Brass 
  
• Muzzle Velocity: 900 fps
• Muzzle Energy: 360 ft. / lbs

MAGPUL Standard 30rd PMAG Rebuild Kit - MAG211-ODGRN Package of 5 Mags.  COLOR IS OD GREEN

Rebuild Kit for 30Rd AR15/M16 .223 Remington / 5.56x45mm NATO.

Package of 5 mags

A 30rd PMAG is disassembled to create a rebuild kit so legally-owned magazines can be repaired. 

These are the newest "M" revision!

These rebuild kits may not to be used to assemble a new high capacity magazine which would be in violation of local or state law. These rebuild kits are intended to rebuild a legally owned pre-ban magazine or for assembling a 10 round magazine pursuant to local or state law. 

By purchasing these rebuild kits you accept all responsibility to remain in accordance with local or state law and any failure to do so will be your sole responsibility.  

The PMAG™ (Polymer MAGazine) is a lightweight 5.56 NATO, M-16 compatible magazine. It features an advanced impact resistant polymer construction, a pop-off Impact Cover for storage, and an easy to dissasemble design with a flared floorplate for easy magazine extraction from pouches. PMAG™ utilizes a resilient stainless steel spring for corrosion resistance. Our latest revision has been updated with a new body ribbing design which allows for better compatibility with aftermarket mag couplers, a new follower which provides even smoother loading with military stripper clips, and the Impact Cover can now be snapped onto the Floorplate when not in use to prevent possible loss.

Our latest revision has been updated with a new body ribbing design which allows for better compatibility with aftermarket mag couplers, a new follower which provides even smoother loading with military stripper clips, and the Impact Cover can now be snapped onto the Floorplate when not in use to prevent possible loss.

• Impact and crush resistant polymer construction
• Constant-curve internal geometry for smooth feeding
• Anti-tilt, self-lubricating follower for increased reliability
• Multi-use Impact Cover to protect feedlips from impact damage, keep dust and dirt out of the magazine during storage, and can be used as a tool for easy cartridge removal
• USGI-spec stainless steel spring for corrosion resistance and field compatibility
• Textured gripping surface and flared floorplate for positive magazine handling and easy disassembly
• OD Green Polymer

NSN: MAG211-ODGRN MAGAZINE, CARTRIDGE 1005-01-576-5159

Made in U.S.A. 

MAGPUL Standard 30rd PMAG - MAG211-ODGRN Package of 5 Mags.  COLOR IS OD GREEN

Rebuild Kit for 30Rd AR15/M16 .223 Remington / 5.56x45mm NATO.

Package of 5 mags

These are the newest "M" revision!

The PMAG™ (Polymer MAGazine) is a lightweight 5.56 NATO, M-16 compatible magazine. It features an advanced impact resistant polymer construction, a pop-off Impact Cover for storage, and an easy to dissasemble design with a flared floorplate for easy magazine extraction from pouches. PMAG™ utilizes a resilient stainless steel spring for corrosion resistance. Our latest revision has been updated with a new body ribbing design which allows for better compatibility with aftermarket mag couplers, a new follower which provides even smoother loading with military stripper clips, and the Impact Cover can now be snapped onto the Floorplate when not in use to prevent possible loss.

Our latest revision has been updated with a new body ribbing design which allows for better compatibility with aftermarket mag couplers, a new follower which provides even smoother loading with military stripper clips, and the Impact Cover can now be snapped onto the Floorplate when not in use to prevent possible loss.

• Impact and crush resistant polymer construction
• Constant-curve internal geometry for smooth feeding
• Anti-tilt, self-lubricating follower for increased reliability
• Multi-use Impact Cover to protect feedlips from impact damage, keep dust and dirt out of the magazine during storage, and can be used as a tool for easy cartridge removal
• USGI-spec stainless steel spring for corrosion resistance and field compatibility
• Textured gripping surface and flared floorplate for positive magazine handling and easy disassembly
• OD Green Polymer

NSN: MAG211-ODGRN MAGAZINE, CARTRIDGE 1005-01-576-5159

Made in U.S.A. 

PMC X-TAC 5.56 Green Tip Penetrator 5.56x45mm NATO 62 Grain Full metal jacket Light Armor Piercing 20 round box

PMC 5.56 PMC X-TAC 62gr. (SS109) Full Metal Jacket Ammo. The PMC X-TAC Line is manufactured to the highest industry and military specifications to ensure its performance, without fail, when your life is on the line. PMC’s X-TAC ammunition is powerful, accurate and dependable, because in a life-threatening situation, no other standard is acceptable. PMC’s exacting adherence to the precise specifications of military and law-enforcement organizations assures that X-TAC ammunition will perform perfectly in that fraction of a second when a serious threat arises. This ammo comes packed in 20rds. per box. New manufacturer ammunition.

Technical Information

PMC X-TAC 5.56 Green Tip Penetrator 5.56x45mm NATO 62 Grain Full metal jacket Light Armor Piercing 1000 Round Case

PMC 5.56 PMC X-TAC 62gr. (SS109) Full Metal Jacket Ammo. The PMC X-TAC Line is manufactured to the highest industry and military specifications to ensure its performance, without fail, when your life is on the line. PMC’s X-TAC ammunition is powerful, accurate and dependable, because in a life-threatening situation, no other standard is acceptable. PMC’s exacting adherence to the precise specifications of military and law-enforcement organizations assures that X-TAC ammunition will perform perfectly in that fraction of a second when a serious threat arises. This ammo comes packed in 20rds. per box. New manufacturer ammunition.

Technical Information

MAG310-BLK

MAGPUL CTR Carbine Stock - Black. Fits AR15 / M16 / M4

The Magpul CTR (Compact/Type Restricted) – Mil-Spec Model is a drop-in replacement butt stock for AR15/M16 carbines using mil-spec sized receiver extension tubes. Designed for light, fast action the streamlined A-frame profile avoids snagging and shields the release latch to prevent accidental activation. The extra-power lock mechanism uses a premium chrome-silicon spring to avert auto-collapse failure and maintains strength by resisting spring relaxation. The CTR also features a supplemental friction lock system that minimizes wobble* for enhanced weapon stability and accuracy. The Mil-Spec Model includes a standard 0.30" rubber butt-pad which provides positive shoulder purchase to prevent slippage even with body armor or modular gear.

Made in U.S.A.

• Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, Armalite, S&W, LMT, and others (please see the note below)
• Supplemental friction lock minimizes accuracy robbing wobble*
• Premium chrome-silicon lock spring provides positive locking and long service life
• Sloping cheek weld combines a slim profile with user comfort
• Shielded release latch prevents snagging and accidental operation
• Side mounting slots accept optional cheek risers for NON-AR15/M16 applications
• Compatible with Magpul ASAP® and other receiver-mount sling attachments
• Sling Mounts
  
  • Rear - Push-button QD sling mount accommodates up to 1.5" swivels (Ambidextrous)
  • Rear/Bottom - 1.25" sling loops
  • Toe - Lanyard hole for custom para-cord rigs

Included Accessories**

• Rubber Butt-Pad, 0.30" (Removable)

NOTE: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec and commercial-spec. If you have a commercial-spec extension on your rifle, make sure to order the Commercial-Spec CTR. Please see the "Related Info" section above to determine which tube you have.

If you have one of the uncommon military tubes with an extended slant-back, along with the Mil-Spec MOE you will also need to order the Extended Rubber Butt-Pad, 0.55" (sold separately).

* Specifications based on standard-length (flat-back) M4 Carbine receiver extension and may vary depending on tube manufacturer.
Standard Rubber Butt-Pad, 0.30" weight: 0.08 lb. Optional Extended Rubber Butt-Pad, 0.55" weight: 0.11 lb. Optional Enhanced Rubber Butt-Pad weight: 0.13 lb.

• Made in U.S.A.
• Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, Armalite, S&W, LMT, and others (please see the note below)
• Supplemental friction lock minimizes accuracy robbing wobble*
• Premium chrome-silicon lock spring provides positive locking and long service life
• Sloping cheek weld combines a slim profile with user comfort
• Shielded release latch prevents snagging and accidental operation
• Side mounting slots accept optional cheek risers for NON-AR15/M16 applications
• Compatible with Magpul ASAP® and other receiver-mount sling attachments
• Sling Mounts
• Rear - Push-button QD sling mount accommodates up to 1.5" swivels (Ambidextrous)
• Rear/Bottom - 1.25" sling loops
• Toe - Lanyard hole for custom para-cord rigs

• Rubber Butt-Pad, 0.30" (Removable)

DoubleTap Ammunition 10mm Auto 125 Grain Barnes TAC-XP Hollow Point, 50 round box. The Tac-XP is the famous Barnes Solid Copper Hollow Point Defense Load. This 100% lead free projectile has been tested to penetrate barriers like metal, wood and glass with no loss on projectile weight. New production, non-corrosive, fully reloadable Nickle plated brass case. DoubleTap manufacturers some of the highest quality ammunition available. DoubleTap 10mm ammunition is designed and produced to provide the pressures and performance found in the original Norma loading. The 10mm Auto is a very powerful and packs the flat trajectory and high evergy of a magnum revolver cartridge in a relatively short, rimless, cartridge for a semi-automatic handgun.

The 10 mm Auto is suitable for hunting medium-sized game at moderate ranges, is certainly more than adequate for defensive or tactical use, and is one of the few true semi-automatic, rimless cartridges that is legal for hunting white tail deer in many U.S. States.

Made in USA

Technical & Ballistic Information

• Caliber: 10mm Auto
• Bullet Weight: 125 Grain
• Bullet Style: 100% Solid Copper Hollow Point
• Case Type: Nickel Plated Brass 
  
• Muzzle Velocity: 1600 fps
• Muzzle Energy: 767 ft. lbs

MAG210-FDE Flat Dark Earth

*PACKAGE OF 5 MAGS

PMAG 30 MAGLEVEL 5.56x45 Magazine -AR15/M16

The PMAG is a lightweight 5.56x45 NATO (.223 Remington) AR15/M16 compatible magazine.

It features an advanced impact resistant polymer construction, a pop-off Impact/Dust Cover for storage, and an easy to disassemble design with a flared floorplate for positive magazine extraction from pouches. The PMAG 30 utilizes a resilient stainless steel spring for corrosion resistance and a anti-tilt, self-lubricating follower for increased reliability.

The PMAG MagLevel features transparent windows on both sides of the body and has a painted indicator on the spring for quick determination of approximate rounds remaining in the magazine. Our latest revision has been updated with a new body ribbing design which allows for better compatibility with aftermarket mag couplers, a new follower which gives even smoother loading with military stripper clips, and the Impact/Dust Cover can now be snapped onto the floorplate when not in use to prevent possible loss. Along with larger windows and round count numbers on the body, the PMAG MagLevel's stainless steel magazine spring is now coated with mil-spec black oxide and the indicator coil painted with a high visibility orange color.

Made in U.S.A.

• Features Impact and crush resistant polymer construction
• Constant-curve internal geometry for smooth feeding Anti-tilt, self-lubricating follower for increased reliability Multi-use Impact Cover to protect feedlips from impact damage, keep dust and dirt out of the magazine during storage, and can be used as a tool for easy cartridge removal
• Black-oxide coated (MIL-DTL-13924D) USGI-spec stainless steel spring
• Transparent windows on both sides of the PMAG MagLevel along with a painted indicator on the spring allows for easy determination of rounds remaining
• Textured gripping surface and flared floorplate for positive magazine handling and easy disassembly

MAG210-BLK

*PACKAGE OF 5 MAGS

PMAG 30 MAGLEVEL 5.56x45 Magazine -AR15/M16

The PMAG is a lightweight 5.56x45 NATO (.223 Remington) AR15/M16 compatible magazine.

It features an advanced impact resistant polymer construction, a pop-off Impact/Dust Cover for storage, and an easy to disassemble design with a flared floorplate for positive magazine extraction from pouches. The PMAG 30 utilizes a resilient stainless steel spring for corrosion resistance and a anti-tilt, self-lubricating follower for increased reliability.

The PMAG MagLevel features transparent windows on both sides of the body and has a painted indicator on the spring for quick determination of approximate rounds remaining in the magazine. Our latest revision has been updated with a new body ribbing design which allows for better compatibility with aftermarket mag couplers, a new follower which gives even smoother loading with military stripper clips, and the Impact/Dust Cover can now be snapped onto the floorplate when not in use to prevent possible loss. Along with larger windows and round count numbers on the body, the PMAG MagLevel's stainless steel magazine spring is now coated with mil-spec black oxide and the indicator coil painted with a high visibility orange color.

Made in U.S.A.

• Features Impact and crush resistant polymer construction
• Constant-curve internal geometry for smooth feeding Anti-tilt, self-lubricating follower for increased reliability Multi-use Impact Cover to protect feedlips from impact damage, keep dust and dirt out of the magazine during storage, and can be used as a tool for easy cartridge removal
• Black-oxide coated (MIL-DTL-13924D) USGI-spec stainless steel spring
• Transparent windows on both sides of the PMAG MagLevel along with a painted indicator on the spring allows for easy determination of rounds remaining
• Textured gripping surface and flared floorplate for positive magazine handling and easy disassembly

NSN: MAG210-BLK MAGAZINE, CARTRIDGE 1005-01-576-5164

MAG217-BLK

MAGPUL PMAG 20 RD 5.56x45 Magazine -AR15/M16

This variant of the PMAG is a lightweight 20-round 5.56x45 NATO (.223 Remington) AR15/M16 compatible magazine. It features a straight body with an advanced impact resistant polymer construction, a pop-off Impact/Dust Cover for storage, and an easy to disassemble design with a flared floorplate for positive magazine extraction from pouches. The PMAG 20 utilizes a resilient stainless steel spring for corrosion resistance and a controlled-tilt, self-lubricating follower for increased reliability.

Made in U.S.A.

FEATURES

• Impact and crush resistant polymer construction
• Straight-bodied 20-round design maintains a low profile
• Controlled-tilt, self-lubricating follower for increased reliability
• Multi-use Impact Cover protects feedlips from impact damage, keeps dust and dirt out of the magazine during storage, and can be used as a tool for easy cartridge removal
• High quality stainless steel spring for corrosion resistance
• Textured gripping surface and flared floorplate for positive magazine handling and easy disassembly

MAG400-BLK

MAGPUL MOE Carbine Stock - Black. Fits AR15/M16

The Magpul MOE Stock – Mil-Spec Model is a drop-in replacement butt-stock for AR15/M16 carbines using mil-spec sized receiver extension tubes. Designed for light, fast action the streamlined A-frame profile avoids snagging and shields the release latch to prevent accidental activation. The extra-power lock mechanism uses a premium chrome-silicon spring to avert auto-collapse failure and maintains strength by resisting spring relaxation. The Mil-Spec Model includes a standard 0.30" rubber butt-pad which provides positive shoulder purchase to prevent slippage even with body armor or modular gear.

Made in U.S.A.

• Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, Armalite, S&W, LMT, and others (please see the note below)
• Premium chrome-silicon lock spring provides positive locking and long service life
• Sloping cheek weld combines a slim profile with user comfort
• Shielded release latch prevents snagging and accidental operation
• Side mounting slots accept optional cheek risers for NON-AR15/M16 applications
• Compatible with Magpul ASAP® and other receiver-mount sling attachments
• Sling Mounts
  
  • Rear/Bottom - 1.25" Sling loops
  • Toe - Lanyard hole for custom para-cord rigs

Included Accessories*

• Rubber Butt-Pad, 0.30" (Removable)

Optional Accessories*

• Extended Rubber Butt-Pad, 0.55"
• Enhanced Rubber Butt-Pad, 0.70"
• Cheek Risers (0.25", 0.50", 0.75" for NON-AR15/M16 applications)

Specifications*

• MOE, Mil-Spec (w/ Rubber Butt-Pad, 0.30")
  
  • Weight, Stock: 0.50 lb.
  • Weight, w/ Rec. Extension: 0.80 lb.
  • Length, Stock: 6.90 in.
  • LOP Adjustment Range: 3.25 in.
  • LOP, M4 Collapsed: 10.70 in.
  • LOP, M4 Extended: 13.95 in.

NOTE: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec and commercial-spec. If you have a commercial-spec extension on your rifle, make sure to order the Commercial-Spec MOE. Please see the "Related Info" section above to determine which tube you have.
If you have one of the uncommon military tubes with an extended slant-back, along with the Mil-Spec MOE you will also need to order the Extended Rubber Butt-Pad, 0.55" (sold separately).

* Specifications based on standard-length (flat-back) M4 Carbine receiver extension and may vary depending on tube manufacturer.
Standard Rubber Butt-Pad, 0.30" weight: 0.08 lb. Optional Extended Rubber Butt-Pad, 0.55" weight: 0.11 lb. Optional Enhanced Rubber Butt-Pad weight: 0.13 lb.

MAG440-BLK

MAGPUL MOE Carbine Handguard for the AR15/M4 For Piston and Direct Impingement AR15 Gas systems. Color is Black.

The Magpul MOE Hand Guard for AR15/M16 rifles with carbine-length 'direct impingement' gas systems combines the light weight of a standard hand guard with modular flexibility. Slots at the two, six, and ten o'clock positions allow for optional mounting of Picatinny rail sections for tactical lights and other accessories. Reinforced, heat-resistant polymer construction provides operational durability without the weight and expense of an aluminum rail hand guard. Front extensions and lower lip provides additional operator protection from hot front sight assembly.

Made in U.S.A.

• Replaces standard M4 Carbine-type hand guards
• Fits Piston and Direct Impingement AR15 gas systems.
• Easy to install utilizing existing front hand guard retaining cap and delta ring
• MIL-STD-1913 Picatinny rail mounting slots at the two, six, and ten o'clock positions
• Reinforced, heat-resistant polymer construction
• Integral aluminum heat shield
• Front lip and side extensions, shields hand from hot gas block

Optional Accessories

• MOE Polymer Rail Sections (5, 7, 9, and 11 slot lengths available)
• MOE Illumination Kit
• MVG - MOE Vertical Grip

Specifications

• MOE Hand Guard, Carbine-Length
  
  • Weight: 0.39 lb.
  • Length, overall: 7.12 in.
  • Length, mounting: 6.56 in.
  • Height, excluding lip: 2.32 in.
  • Width, max: 2.19 in.

NOTE: The MOE Hand Guard – Carbine-Length is a direct replacement for existing M4 carbine type handguards and utilizes the existing front hand guard retaining cap and delta ring.

MAG415-BLK

MAGPUL MOE Grip MAG415-BLK AR15/M16 Pistol Grip. Color is Black.

The MOE grip provides Magpul quality, feel, and durability in an economical, drop-in upgrade for the standard AR15/M16/M4 pistol grip. The ergonomic, hand filling design combines aggressive texturing with storage core capability. With a similar shape to a 'medium' sized MIAD, the one-piece reinforced polymer construction provides simplicity and a reduced cost while still maintaining the durability needed to withstand operational environments. The MOE Grip accepts optional storage cores for gear stowage and includes a basic grip cap. All mounting hardware included.

Made in U.S.A.

• Replaces standard AR15 / M16 / M4 Pistol Grip
• Will NOT provide proper function with 7.62 NATO AR10/SR25 style of rifles.
• All Mounting hardware included

MAG243-BLK

20LR PMAG by MAGPUL 20 Rd .308 / 7.62x51 Magazine SR25 / M110 MAG243-blk 

The 7.62x51 NATO (.308 Winchester) PMAG 20LR is a cost effective high reliability magazine for SR25/M110 pattern rifles featuring true 20-round capacity, constant-curve body, and snap on Impact/Dust Cover. Designed specifically for military-issue MK11/M110 rifles and mil-spec ammunition (including M118LR), the PMAG 20LR is less than half the weight of standard issue steel magazines and maintains a service life round count approximately equal to the rifle barrel itself.

Made in U.S.A.

FEATURES

• Impact and crush resistant polymer construction
• Constant-curve internal geometry for smooth feeding
• Specially designed, self-lubricating follower for increased reliability
• Multi-use Impact/Dust Cover to protect feedlips from impact damage, keep dust and dirt out of the magazine during storage, and can be used as a tool for easy cartridge removal
• High-quality stainless steel spring for corrosion resistance
• Textured gripping surface and flared floorplate for positive magazine handling
• Robust floorplate for increased drop protection, easily removable for field maintenance and cleaning.
• Optimized for use with 7.62x51 NATO (.308 Winchester) ammunition with an overall cartridge length less than 2.820", including M118LR.
• Additional commercial rifle compatibility includes the KAC SR25, DPMS LR308, LWRCI REPR, LMT 7.62 MRP, LaRue Tactical OBR, Bushmaster .308 ORC, Remington Model R-25, POF P-308, JP Enterprises LRP-07, and others

NOTE: NOT compatible with rifles that utilize M14 type, FN FAL, or HK 91/G3 magazines

MAG217-DKEAR  ( Flat Dark Earth Color )

MAGPUL PMAG 20 RD 5.56x45 Magazine -AR15/M16

This variant of the PMAG is a lightweight 20-round 5.56x45 NATO (.223 Remington) AR15/M16 compatible magazine. It features a straight body with an advanced impact resistant polymer construction, a pop-off Impact/Dust Cover for storage, and an easy to disassemble design with a flared floorplate for positive magazine extraction from pouches. The PMAG 20 utilizes a resilient stainless steel spring for corrosion resistance and a controlled-tilt, self-lubricating follower for increased reliability. Color is Flat Dark Earth.

Made in U.S.A.

FEATURES

• Impact and crush resistant polymer construction
• Straight-bodied 20-round design maintains a low profile
• Controlled-tilt, self-lubricating follower for increased reliability
• Multi-use Impact Cover protects feedlips from impact damage, keeps dust and dirt out of the magazine during storage, and can be used as a tool for easy cartridge removal
• High quality stainless steel spring for corrosion resistance
• Textured gripping surface and flared floorplate for positive magazine handling and easy disassembly

MAG243-BLK

20LR PMAG by MAGPUL 20 Rd .308 / 7.62x51 Magazine SR25 / M110 MAG243-blk 

The 7.62x51 NATO (.308 Winchester) PMAG 20LR is a cost effective high reliability magazine for SR25/M110 pattern rifles featuring true 20-round capacity, constant-curve body, and snap on Impact/Dust Cover. Designed specifically for military-issue MK11/M110 rifles and mil-spec ammunition (including M118LR), the PMAG 20LR is less than half the weight of standard issue steel magazines and maintains a service life round count approximately equal to the rifle barrel itself.

Made in U.S.A.

FEATURES

• Impact and crush resistant polymer construction
• Constant-curve internal geometry for smooth feeding
• Specially designed, self-lubricating follower for increased reliability
• Multi-use Impact/Dust Cover to protect feedlips from impact damage, keep dust and dirt out of the magazine during storage, and can be used as a tool for easy cartridge removal
• High-quality stainless steel spring for corrosion resistance
• Textured gripping surface and flared floorplate for positive magazine handling
• Robust floorplate for increased drop protection, easily removable for field maintenance and cleaning.
• Optimized for use with 7.62x51 NATO (.308 Winchester) ammunition with an overall cartridge length less than 2.820", including M118LR.
• Additional commercial rifle compatibility includes the KAC SR25, DPMS LR308, LWRCI REPR, LMT 7.62 MRP, LaRue Tactical OBR, Bushmaster .308 ORC, Remington Model R-25, POF P-308, JP Enterprises LRP-07, and others

NOTE: NOT compatible with rifles that utilize M14 type, FN FAL, or HK 91/G3 magazines

*Ships to ban states as a REBUILD kit.

MAG401-BLK

MAGPUL MOE Carbine Stock - Black. Fits AR15/M16

Magpul Original Equipment (MOE) is a line of firearm accessories designed to provide a high-quality, economical alternative to standard weapon parts. The MOE line distinguishes itself with a simplified feature set, but maintains Magpul engineering and material quality.

The Magpul MOE Stock – Commercial-Spec Model is a drop-in replacement butt-stock for AR15/M16 carbines using commercial-spec sized receiver extension tubes. Designed for light, fast action the streamlined A-frame profile avoids snagging and shields the release latch to prevent accidental activation. The extra-power lock mechanism uses a premium chrome-silicon spring to avert auto-collapse failure and maintains strength by resisting spring relaxation. The Commercial-Spec Model includes an extended 0.55" rubber butt-pad to provide positive shoulder purchase and accommodates the longer, slanted back common to most commercial-spec tubes.

Made in U.S.A.

Features

• Mounts on commercial-spec sized carbine receiver extension tube (not included) from manufacturers such as Bushmaster, DPMS, Olympic, and others (please see the note below)
• Premium chrome-silicon lock spring provides positive locking and long service life
• Sloping cheek weld combines a slim profile with user comfort
• Shielded release latch prevents snagging and accidental operation
• Side mounting slots accept optional cheek risers for NON-AR15/M16 applications
• Compatible with Magpul ASAP® and other receiver-mount sling attachments
• Sling Mounts
  
  • Rear/Bottom - 1.25" Sling loops
  • Toe - Lanyard hole for custom para-cord rigs

Included Accessories*

• Extended Rubber Butt-Pad, 0.55" (Removable)

Optional Accessories*

• Rubber Butt-Pad, 0.30"
• Enhanced Rubber Butt-Pad, 0.70:
• Cheek Risers (0.25", 0.50", 0.75" for NON-AR15/M16 applications)

Specifications*

• MOE, Commercial-Spec (w/ Extended Rubber Butt-Pad, 0.55")
  
  • Weight, Stock: 0.53 lb.
  • Weight, w/ Rec. Extension: 0.93 lb.
  • Length, Stock: 7.15 in.
  • LOP Adjustment Range: 3.80 in.
  • LOP, M4 Collapsed: 10.95 in.
  • LOP, M4 Extended: 14.75 in.

NOTE: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec and commercial-spec. If you have a mil-spec extension on your rifle, make sure to order the Mil-Spec MOE. Please see the "Related Info" section above to determine which tube you have.


* Specifications based on extended-length (slant-back) M4 Carbine receiver extension and may vary depending on tube manufacturer.
Extended Rubber Butt-Pad, 0.55" weight: 0.11 lb.
Optional Rubber Butt-Pad, 0.30" (weight: 0.08 lb.) and Enhanced Rubber Butt-Pad, 0.70" (weight: 0.13 lb.) may ONLY be used with standard-length (flat-back) M4 Carbine receiver extensions.

MAGPUL MOE+ Rubber Overmold Pistol Grip MAG416-BLK AR15/M16 Pistol Grip. Color is Black.

The MOE+ Grip brings together reinforced polymer grip construction with ultra comfortable, wrap-around rubber overmolding for maximum weapon control in all environments. Same shape as a 'medium' sized MIAD grip this AR15/M16 direct drop-in replacement pistol grip features a hard-polymer bottom edge to reduce the possibility of snagging on clothing or gear. The MOE+ Pistol Grip accepts optional storage cores like standard MOE grips and includes a basic grip cap insert. All mounting hardware is included. Made in U.S.A.

NOTE: This grip will function properly with 7.62 NATO AR10/SR25 style of rifles but, depending on the make of the rifle, may or may not leave a gap between the 'beaver tail' and the receiver. This gap is purely aesthetic and will not affect function.

RWS 9mm Luger Ammunition 124 Grain FMJ 50 round box. New production, non-corrosive, fully reloadable brass case. RWS manufacturers some of the highest quality ammunition available. The RWS 9mm round is produced for and used by the majority of NATO pact countries in Eastern Europe. RWS is used by SIG SAUER for firearms function testing. Retail packaged. All new production. German engineered, manufacturered in Switzerland.

Technical Information

• Caliber: 9mm Luger
• Bullet Weight: 124 Grain
• Bullet Style: Full Metal Jacket / Bi-Metal (lead core with a mild steel copper plated jacket)
• Case Type: Brass 
  
  Ballistics Information: 
• Muzzle Velocity: 1160 fps
• Muzzle Energy: 348 ft. lbs.

RWS 9mm Luger Ammunition 124 Grain FMJ 50 round box. New production, non-corrosive, fully reloadable brass case. RWS manufacturers some of the highest quality ammunition available. The RWS 9mm round is produced for and used by the majority of NATO pact countries in Eastern Europe. RWS is used by SIG SAUER for firearms function testing. Retail packaged. All new production. German engineered, manufacturered in Switzerland.

Technical Information

• Caliber: 9mm Luger
• Bullet Weight: 124 Grain
• Bullet Style: Full Metal Jacket / Bi-Metal (lead core with a mild steel copper plated jacket)
• Case Type: Brass 
  
  Ballistics Information: 
• Muzzle Velocity: 1160 fps
• Muzzle Energy: 348 ft. lbs.

MAGPUL RSA Rail Sling Attachment Black MAG502-BLK 

The RSA provides a forward sling attachment point for the Magpul MS2 or MS3 and other clip-in systems. No gunsmithing required. Tighten screw with a quarter and your ready to attach your sling.

Made from precision cast black manganese phosphatized steel, the RSA attaches to any MIL-STD-1913 Picatinny/STANAG 4694 rail. The RSA has been proven to withstand stress tests of over 300 pounds yet weighs a mere 1.26 ounces.

Made in U.S.A.

Features

• All cast steel construction
• Mil-spec black manganese phosphate finish
• Works on any standard 1913 Picatinny-spec rail

RWS 9mm Luger Ammunition 124 Grain FMJ 50 round box. New production, non-corrosive, fully reloadable brass case. RWS manufacturers some of the highest quality ammunition available. The RWS 9mm round is produced for and used by the majority of NATO pact countries in Eastern Europe. RWS is used by SIG SAUER for firearms function testing. Retail packaged. All new production. German engineered, manufacturered in Switzerland.

Technical Information

• Caliber: 9mm Luger
• Bullet Weight: 124 Grain
• Bullet Style: Full Metal Jacket / Bi-Metal (lead core with a mild steel copper plated jacket)
• Case Type: Brass 
  
  Ballistics Information: 
• Muzzle Velocity: 1160 fps
• Muzzle Energy: 348 ft. lbs.

RWS Sport Ammunition .45 ACP, 230 Grain Full Metal Jacket, Case of 500 rds. Brass case, Boxer Primed, Fully Reloadable, New Manufacture. High quality RWS brand is used at SIG SAUER for factory testing of SIG handguns. RWS is made to exacting SAAMI specifications in an ISO 9001 production facility. RWS brings quality and value without compromise.

This ammunition is new product, non-corrosive, in boxer-primed, reloadable brass cases. 

Technical Information:

• Caliber: 45 ACP
• Bullet Weight: 230 Grain
• Bullet Style: Full Metal Jacket
• Case Type: Brass 

Ballistics Information:

• Muzzle Velocity: 853 fps
• Muzzle Energy: 371 ft. lbs

SWISS P Ball .338 LAPUA MAGNUM 252 GRAIN FMJ Full Metal Jacket SNIPER Ammunition Brass Case Fully Reloadable Box of 20 rds. Made in Switzerland

The cartridges of the SWISS P line have been developed especially for precision accuracy applications and designed down to the last detail for a highly professional use. They offer an above-average hit accuracy and first-class reliability. Over the usual operative range all cartridge types display the same point of impact, which we refer to as coordinated ballistics. An adjustment of the optics is thus unnecessary if the situation calls for a change of cartridge. This allows the shooter to fully concentrate on firing and always achieve the best first-shot effect. The target-ballistic and intervention-oriented effect of the special projectiles is excellent in both the soft and hard target.

Box of 20 rounds.

Ballistics Information:

Muzzle Velocity:  2821.5 fps

Muzzle Energy:  4395.102 ft-lbs

Accuracy at 100m:  100% radius 10mm, 10 rounds

Accuracy at 300m: 100% radius 30mm, 10 rounds

SWISS P TARGET MATCH .308 WIN 7.62x51 175 GRAIN HPBT SNIPER Ammunition Brass Case Fully Reloadable Box of 10 rds. Made in Switzerland

The cartridges of the SWISS P line have been developed especially for precision accuracy applications and designed down to the last detail for a highly professional use. They offer an above-average hit accuracy and first-class reliability. Over the usual operative range all cartridge types display the same point of impact, which we refer to as coordinated ballistics. An adjustment of the optics is thus unnecessary if the situation calls for a change of cartridge. This allows the shooter to fully concentrate on firing and always achieve the best first-shot effect. The target-ballistic and intervention-oriented effect of the special projectiles is excellent in both the soft and hard target.

Ballistics Information:

Muzzle Velocity: min. 790 m/s

Mean Chamber Pressure: max. 3700 bar

Accuracy at 100m:  100% radius 10mm, 10 rounds

Accuracy at 300m: 100% radius 30mm, 10 rounds

MFS Ammunition. 7.62x39mm Russian 123 Grain, Full Metal Jacket, Zinc Plated Steel Case, 500 rd Case. Lead core bullet encased in a bi-metal jacket. This is some of the finest 7.62x39mm ammo available. The Zinc plated steel case aids in both corrosion resistance and extraction and is superior to poly or lacquer coated steel cases which are dirty and can gum up your rifle. Ideal for your Russian, Chinese, Yugoslavian, Romanian, or polish AK-47, AKM, and SKS rifles. 

This ammunition is new production.

Technical Information

SWISS P Ball .308 Winchester 7.62x51 SNIPER Ammunition 176 grain FMJ Brass Case Fully Reloadable Case of 200 rds. Packaged 20 rounds per box and 10 boxes per case.

The cartridges of the SWISS P line have been developed especially for precision accuracy applications and designed down to the last detail for a highly professional use. They offer an above-average hit accuracy and first-class reliability. Over the usual operative range all cartridge types display the same point of impact, which we refer to as coordinated ballistics. An adjustment of the optics is thus unnecessary if the situation calls for a change of cartridge. This allows the shooter to fully concentrate on firing and always achieve the best first-shot effect. The target-ballistic and intervention-oriented effect of the special projectiles is excellent in both the soft and hard target.

Ballistics Information:

Muzzle Velocity:  2607 fps

Muzzle Energy:  2624.668 ft-lbs

Accuracy at 100m:  100% radius 10mm, 10 rounds

Accuracy at 300m: 100% radius 30mm, 10 rounds

SWISS P TARGET .308 WIN 7.62x51 168 GRAIN HPBT SNIPER Ammunition Brass Case Fully Reloadable Case of 200 rds. Packaged 20 rounds per box and 10 boxes per case.

The cartridges of the SWISS P line have been developed especially for precision accuracy applications and designed down to the last detail for a highly professional use. They offer an above-average hit accuracy and first-class reliability. Over the usual operative range all cartridge types display the same point of impact, which we refer to as coordinated ballistics. An adjustment of the optics is thus unnecessary if the situation calls for a change of cartridge. This allows the shooter to fully concentrate on firing and always achieve the best first-shot effect. The target-ballistic and intervention-oriented effect of the special projectiles is excellent in both the soft and hard target.

Ballistics Information:

Muzzle Velocity:  2656.5 fps

Muzzle Energy:  2603.275 ft-lbs

Accuracy at 100m:  100% radius 10mm, 10 rounds

Accuracy at 300m: 100% radius 30mm, 10 rounds

SWISS P BALL .300 WIN MAG 176 GRAIN FMJ SNIPER Ammunition Brass Case Fully Reloadable Case of 200 rds. Made in Switzerland

The cartridges of the SWISS P line have been developed especially for precision accuracy applications and designed down to the last detail for a highly professional use. They offer an above-average hit accuracy and first-class reliability. Over the usual operative range all cartridge types display the same point of impact, which we refer to as coordinated ballistics. An adjustment of the optics is thus unnecessary if the situation calls for a change of cartridge. This allows the shooter to fully concentrate on firing and always achieve the best first-shot effect. The target-ballistic and intervention-oriented effect of the special projectiles is excellent in both the soft and hard target.

Packaged 20 rounds per box and 200 rounds per case.

Ballistics Information:

Muzzle Velocity:  2854.5 fps

Muzzle Energy:  3146.208 ft-lbs

Accuracy at 100m:  100% radius 10mm, 10 rounds

Accuracy at 300m: 100% radius 30mm, 10 rounds

SWISS P TARGET MATCH .308 WIN 7.62x51 175 GRAIN HPBT SNIPER Ammunition Brass Case Fully Reloadable Case of 200 rds. Made in Switzerland

The cartridges of the SWISS P line have been developed especially for precision accuracy applications and designed down to the last detail for a highly professional use. They offer an above-average hit accuracy and first-class reliability. Over the usual operative range all cartridge types display the same point of impact, which we refer to as coordinated ballistics. An adjustment of the optics is thus unnecessary if the situation calls for a change of cartridge. This allows the shooter to fully concentrate on firing and always achieve the best first-shot effect. The target-ballistic and intervention-oriented effect of the special projectiles is excellent in both the soft and hard target.

Ballistics Information:

Muzzle Velocity: min. 790 m/s

Mean Chamber Pressure: max. 3700 bar

Accuracy at 100m:  100% radius 10mm, 10 rounds

Accuracy at 300m: 100% radius 30mm, 10 rounds

SWISS P Target .300 WIN MAG 200 GRAIN HPBT Hollow Point Boat Tail SNIPER Ammunition Brass Case Fully Reloadable Case of 200 rds. Made in Switzerland

The cartridges of the SWISS P line have been developed especially for precision accuracy applications and designed down to the last detail for a highly professional use. They offer an above-average hit accuracy and first-class reliability. Over the usual operative range all cartridge types display the same point of impact, which we refer to as coordinated ballistics. An adjustment of the optics is thus unnecessary if the situation calls for a change of cartridge. This allows the shooter to fully concentrate on firing and always achieve the best first-shot effect. The target-ballistic and intervention-oriented effect of the special projectiles is excellent in both the soft and hard target.

Packaged 20 rounds per box and 200 rounds per case.

Ballistics Information:

Muzzle Velocity:  2871 fps

Muzzle Energy:  3617.586 ft-lbs

Accuracy at 100m:  100% radius 10mm, 10 rounds

Accuracy at 300m: 100% radius 30mm, 10 rounds

SWISS P Target .338 LAPUA MAGNUM 250 GRAIN HPBT Hollow Point Boat Tail SNIPER Ammunition Brass Case Fully Reloadable Case of 200 rds. Made in Switzerland

The cartridges of the SWISS P line have been developed especially for precision accuracy applications and designed down to the last detail for a highly professional use. They offer an above-average hit accuracy and first-class reliability. Over the usual operative range all cartridge types display the same point of impact, which we refer to as coordinated ballistics. An adjustment of the optics is thus unnecessary if the situation calls for a change of cartridge. This allows the shooter to fully concentrate on firing and always achieve the best first-shot effect. The target-ballistic and intervention-oriented effect of the special projectiles is excellent in both the soft and hard target.

Packaged 20 rounds per box and 200 rounds per case.

Ballistics Information:

Muzzle Velocity:  2854.5 fps

Muzzle Energy:  4471.083 ft-lbs

Accuracy at 100m:  100% radius 10mm, 10 rounds

Accuracy at 300m: 100% radius 30mm, 10 rounds

SWISS P Target .338 LAPUA MAGNUM 300 GRAIN HPBT Hollow Point Boat Tail SNIPER Ammunition Brass Case Fully Reloadable Case of 200 rds. Made in Switzerland

The cartridges of the SWISS P line have been developed especially for precision accuracy applications and designed down to the last detail for a highly professional use. They offer an above-average hit accuracy and first-class reliability. Over the usual operative range all cartridge types display the same point of impact, which we refer to as coordinated ballistics. An adjustment of the optics is thus unnecessary if the situation calls for a change of cartridge. This allows the shooter to fully concentrate on firing and always achieve the best first-shot effect. The target-ballistic and intervention-oriented effect of the special projectiles is excellent in both the soft and hard target.

Packaged 10 rounds per box and 200 rounds per case.

Ballistics Information:

Muzzle Velocity:  2706 fps

Muzzle Energy:  4821.481 ft-lbs

Accuracy at 100m:  100% radius 10mm, 10 rounds

Accuracy at 300m: 100% radius 30mm, 10 rounds

SWISS P Ball .338 LAPUA MAGNUM 252 GRAIN FMJ Full Metal Jacket SNIPER Ammunition Brass Case Fully Reloadable Case of 200 rds. Made in Switzerland

The cartridges of the SWISS P line have been developed especially for precision accuracy applications and designed down to the last detail for a highly professional use. They offer an above-average hit accuracy and first-class reliability. Over the usual operative range all cartridge types display the same point of impact, which we refer to as coordinated ballistics. An adjustment of the optics is thus unnecessary if the situation calls for a change of cartridge. This allows the shooter to fully concentrate on firing and always achieve the best first-shot effect. The target-ballistic and intervention-oriented effect of the special projectiles is excellent in both the soft and hard target.

Packaged 20 rounds per box and 200 rounds per case.

Ballistics Information:

Muzzle Velocity:  2821.5 fps

Muzzle Energy:  4395.102 ft-lbs

Accuracy at 100m:  100% radius 10mm, 10 rounds

Accuracy at 300m: 100% radius 30mm, 10 rounds

SWISS P Target .338 LAPUA MAGNUM 250 GRAIN HPBT Hollow Point Boat Tail SNIPER Ammunition Brass Case Fully Reloadable Box of 20 rds. Made in Switzerland

The cartridges of the SWISS P line have been developed especially for precision accuracy applications and designed down to the last detail for a highly professional use. They offer an above-average hit accuracy and first-class reliability. Over the usual operative range all cartridge types display the same point of impact, which we refer to as coordinated ballistics. An adjustment of the optics is thus unnecessary if the situation calls for a change of cartridge. This allows the shooter to fully concentrate on firing and always achieve the best first-shot effect. The target-ballistic and intervention-oriented effect of the special projectiles is excellent in both the soft and hard target.

Packaged 20 rounds per box.

Ballistics Information:

Muzzle Velocity:  2854.5 fps

Muzzle Energy:  4471.083 ft-lbs

Accuracy at 100m:  100% radius 10mm, 10 rounds

Accuracy at 300m: 100% radius 30mm, 10 rounds

SWISS P Target .300 WIN MAG 200 GRAIN HPBT Hollow Point Boat Tail SNIPER Ammunition Brass Case Fully Reloadable Box of 20 rds. Made in Switzerland

The cartridges of the SWISS P line have been developed especially for precision accuracy applications and designed down to the last detail for a highly professional use. They offer an above-average hit accuracy and first-class reliability. Over the usual operative range all cartridge types display the same point of impact, which we refer to as coordinated ballistics. An adjustment of the optics is thus unnecessary if the situation calls for a change of cartridge. This allows the shooter to fully concentrate on firing and always achieve the best first-shot effect. The target-ballistic and intervention-oriented effect of the special projectiles is excellent in both the soft and hard target.

Packaged 20 rounds per box.

Ballistics Information:

Muzzle Velocity:  2871 fps

Muzzle Energy:  3617.586 ft-lbs

Accuracy at 100m:  100% radius 10mm, 10 rounds

Accuracy at 300m: 100% radius 30mm, 10 rounds

SWISS P BALL .300 WIN MAG 176 GRAIN FMJ SNIPER Ammunition Brass Case Fully Reloadable Box of 20 rds. Made in Switzerland

The cartridges of the SWISS P line have been developed especially for precision accuracy applications and designed down to the last detail for a highly professional use. They offer an above-average hit accuracy and first-class reliability. Over the usual operative range all cartridge types display the same point of impact, which we refer to as coordinated ballistics. An adjustment of the optics is thus unnecessary if the situation calls for a change of cartridge. This allows the shooter to fully concentrate on firing and always achieve the best first-shot effect. The target-ballistic and intervention-oriented effect of the special projectiles is excellent in both the soft and hard target.

Packaged 20 rounds per box.

Ballistics Information:

Muzzle Velocity:  2854.5 fps

Muzzle Energy:  3146.208 ft-lbs

Accuracy at 100m:  100% radius 10mm, 10 rounds

Accuracy at 300m: 100% radius 30mm, 10 rounds

SWISS P TARGET .308 WIN 7.62x51 168 GRAIN HPBT SNIPER Ammunition Brass Case Fully Reloadable Box of 20 rounds. 

The cartridges of the SWISS P line have been developed especially for precision accuracy applications and designed down to the last detail for a highly professional use. They offer an above-average hit accuracy and first-class reliability. Over the usual operative range all cartridge types display the same point of impact, which we refer to as coordinated ballistics. An adjustment of the optics is thus unnecessary if the situation calls for a change of cartridge. This allows the shooter to fully concentrate on firing and always achieve the best first-shot effect. The target-ballistic and intervention-oriented effect of the special projectiles is excellent in both the soft and hard target.

Ballistics Information:

Muzzle Velocity:  2657 fps

Muzzle Energy:  2603.275 ft-lbs

Accuracy at 100m:  100% radius 10mm, 10 rounds

Accuracy at 300m: 100% radius 30mm, 10 rounds

SWISS P Ball .308 Winchester 7.62x51 SNIPER Ammunition 176 grain FMJ Brass Case Fully Reloadable Case of 200 rds. Packaged 20 rounds per box.

The cartridges of the SWISS P line have been developed especially for precision accuracy applications and designed down to the last detail for a highly professional use. They offer an above-average hit accuracy and first-class reliability. Over the usual operative range all cartridge types display the same point of impact, which we refer to as coordinated ballistics. An adjustment of the optics is thus unnecessary if the situation calls for a change of cartridge. This allows the shooter to fully concentrate on firing and always achieve the best first-shot effect. The target-ballistic and intervention-oriented effect of the special projectiles is excellent in both the soft and hard target.

Ballistics Information:

Muzzle Velocity:  2607 fps

Muzzle Energy:  2624.668 ft-lbs

Accuracy at 100m:  100% radius 10mm, 10 rounds

Accuracy at 300m: 100% radius 30mm, 10 rounds

SWISS P Target .338 LAPUA MAGNUM 300 GRAIN HPBT Hollow Point Boat Tail SNIPER Ammunition Brass Case Fully Reloadable Box of 10 rds. Made in Switzerland

The cartridges of the SWISS P line have been developed especially for precision accuracy applications and designed down to the last detail for a highly professional use. They offer an above-average hit accuracy and first-class reliability. Over the usual operative range all cartridge types display the same point of impact, which we refer to as coordinated ballistics. An adjustment of the optics is thus unnecessary if the situation calls for a change of cartridge. This allows the shooter to fully concentrate on firing and always achieve the best first-shot effect. The target-ballistic and intervention-oriented effect of the special projectiles is excellent in both the soft and hard target.

Packaged:  10 rounds per box.

Muzzle Velocity:  2706 fps

Muzzle Energy:  4821.481 ft-lbs

Accuracy at 100m:  100% radius 10mm, 10 rounds

Accuracy at 300m: 100% radius 30mm, 10 rounds

MFS Ammunition 308 Winchester 145 Grain Full Metal Jacket Zinc Plated Steel Case. 500 rd case.

Technical Information

Caliber: 308 Winchester

Bullet Weight: 145 Grains

Bullet Style: Full Metal Jacket

Case Type: Zinc Plated Steel

Attention!

You must be 18 or older to order ammunition. Ammunition must ship UPS ground. Due to Department of Transportation regulations, we cannot accept returns on Ammunition. Make sure to use the correct ammunition in your gun. Check local laws before ordering.

MFS .223 Remington, 55 Grain, Bi-metal FMJ, Zn (Zinc) plated steel case, non-corrosive, brand new manufacture.

MFS is a Hungarian company that has been producing ammunition since the 1950s. Their goal is to provide high quality ammunition to hunters and shooters. Th unique Zn (Zinc)  plated cases help protect against corrosion, aids in extraction, reduces camber wear and does not use any lacquer or polymer coatings that can gum up your action. This ammunition is new production, berdan primed for long shelf life and fully non-corrosive. Ships 20 rds per box and 50 boxes per case of 1000 rds.

Read Sheriffs Dept Review on this ammunition here: http://www.facebook.com/notes/weapons-world/test-and-evaluation-results-on-the-mfs-brand-zn-zinc-plated-steel-case-55gr-fmj-/151342978242318

Technical Information

RWS Sport Ammunition .357 Magnum 158 Grain Full Metal Jacket Case of 500 rds.

New Manufactured from All New Components

Technical Information

• Caliber: .357 Magnum
• Bullet Weight: 158 Grain
• Bullet Style: Full Metal Jacket
• Case Type: Brass
• Primer Type: Boxer                   
  
  Ballistics Information

• Muzzle Velocity: 1295 fps
• Muzzle Energy: 593 ft. lbs.

Abbreviation Definitions

PSP = Pointed Soft Point, FMJ = Full Metal Jacket, RNSP = Round Nose Soft Point, FMJ-BT = Full Metal Jacket Boat Tail, SP = Soft Point, SFHP = Starfire Hollow Point, XLC-HP = XLC Hollow Point, HPBT = Hollow Point Boat Tail, SPBT = Soft Point Boat Tail, JHP = Jacketed Hollow Point, FNSP = Flat Nose Soft Point, LRN = Lead Round Nose, LWC = Lead Wadcutter, JSP = Jacketed Soft Point, FMJ FP = Full Metal Jacket Flat Point, FMJ TC = Full Metal Jacket Truncated, FMJ SWC = Full Metal Jacket Semi-Wadcutter, TC-SP = Truncated Soft Point, SWC-CP = Semi-Wadcutter Copper Plated, LFP = Lead Flat Point, WFNGC = Wide Flat Nose Gas Check

Attention!

You must be 21 or older to order ammunition. Ammunition must ship UPS ground. Due to Department of Transportation regulations, we cannot accept returns on Ammunition. Make sure to only use ammunition that was specifically designed for your firearm. Check local laws before ordering.